<p>As part of our expanding Fiesta ST180 product range
AIRTEC Motorsport is proud to launch our Stage 1 intercooler upgrade suitable for track or fast road use.</p>n<p>In order to ensure there is no noticeable loss in performance during extended periods of hard driving
we have developed a larger
freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item.</p>n<p>&nbsp;</p>n<p><strong>DYNO TESTED</strong></p>n<p>Fast Ford magazine intercooler test - measured in degrees C</p>n<p><strong>Standard intercooler: </strong></p>n<ul>n<li>Run 1 Intake temp turbo into intercooler 140 - out of intercooler into engine 85</li>n<li>Run 2 Intake temp turbo into intercooler 131 - out of intercooler into engine 92</li>n<li>Run 3 Intake temp turbo into intercooler 140 - out of intercooler into engine 97</li>n</ul>n<p><strong>AIRTEC Motorsport intercooler: </strong></p>n<ul>n<li>Run 1 Intake temp turbo into intercooler 140 - out of intercooler into engine 31</li>n<li>Run 2 Intake temp turbo into intercooler 150 - out of intercooler into engine 38</li>n<li>Run 3 Intake temp turbo into intercooler 152 - out of intercooler into engine 39</li>n</ul>n<p><strong>Dimensions<br />n</strong><strong>OEM Intercooler<br />n</strong>Width: 690mm</p>n<p>Height: 130mm</p>n<p>Depth: 50mm</p>n<p>Capacity: 4.5 litres</p>n<p>Front area: 900cm²</p>n<p><strong>AIRTEC Motorsport Intercooler<br />n</strong>Width: 710mm</p>n<p>Height: 150mm</p>n<p>Depth: 70mm</p>n<p>Capacity: 7.5 litres</p>n<p>Front area: 1
070cm²</p>n<p><strong> </strong></p>n<p><strong>Features:</strong></p>n<ul>n<li>70mm core Intercooler with flowed cast end tanks</li>n<li>Come with full fitting instructions</li>n<li>No cutting or drilling with this kit</li>n<li>Logos have been put onto flowed cast end tanks</li>n<li>Un-Beatable value for money</li>n<li>Proven Power Increase's for Fast Road &amp; Track</li>n<li>Available in Satin Black or Silver</li>n<li>3-year unlimited mileage warranty</li>n<li>Fitting will take 1-2 hours depending on mechanical skill</li>n<li>Proven to handle 250bhp</li>n</ul>n<p>Highly efficient core capable of dealing with power levels from standard up to Stage 2 software time and time again
perfect for your fast road car. To read a more in depth investigation into this intercoolers performance on our track time Fiesta <a href="http://www.airtecmotorsport.com/wp-content/uploads/sites/4/2020/11/Report-ST-Int-1.pdf">Click Here.</a></p>n<p><strong>Finished in Pro-Series Satin Black or Silver</strong></p>n<p>Registered Design Right number: 6023241</p>n<p><b>AIRTEC Part No: ATINTFO25</b></p>
<p>As part of our expanding Fiesta ST180 product range
New

AIRTEC Motorsport Stage 1 Intercooler Upgrade for Fiesta ST180

£286.99

AIRTEC’s intercooler for the ST180 has proved to be a great upgrade on remapped cars, the 70mm thick core has been rolling road tested to bring down the intake temps from 152 degrees to a very low 39 degrees – that’s a 102-degree reduction in intake temperature!

n

As fitted to our 235bhp ST180 Demo car

n

AIRTEC Part No: ATINTFO25

by Airtec Motorsport

Add to wishlist
EAN: N/A SKU: Airtec Motorsport/ATINTFO25 Category:

More Information

Product Information

As part of our expanding Fiesta ST180 product range, AIRTEC Motorsport is proud to launch our Stage 1 intercooler upgrade suitable for track or fast road use.

n

In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item.

n

 

n

DYNO TESTED

n

Fast Ford magazine intercooler test – measured in degrees C

n

Standard intercooler: 

n

    n

  • Run 1 Intake temp turbo into intercooler 140 – out of intercooler into engine 85

    • n

  • Run 2 Intake temp turbo into intercooler 131 – out of intercooler into engine 92

    • n

  • Run 3 Intake temp turbo into intercooler 140 – out of intercooler into engine 97

    • n

n

AIRTEC Motorsport intercooler: 

n

    n

  • Run 1 Intake temp turbo into intercooler 140 – out of intercooler into engine 31

    • n

  • Run 2 Intake temp turbo into intercooler 150 – out of intercooler into engine 38

    • n

  • Run 3 Intake temp turbo into intercooler 152 – out of intercooler into engine 39

    • n

n

Dimensions
nOEM Intercooler
nWidth: 690mm

n

Height: 130mm

n

Depth: 50mm

n

Capacity: 4.5 litres

n

Front area: 900cm²

n

AIRTEC Motorsport Intercooler
nWidth: 710mm

n

Height: 150mm

n

Depth: 70mm

n

Capacity: 7.5 litres

n

Front area: 1,070cm²

n

 

n

Features:

n

    n

  • 70mm core Intercooler with flowed cast end tanks

    • n

  • Come with full fitting instructions

    • n

  • No cutting or drilling with this kit

    • n

  • Logos have been put onto flowed cast end tanks

    • n

  • Un-Beatable value for money

    • n

  • Proven Power Increase’s for Fast Road & Track

    • n

  • Available in Satin Black or Silver

    • n

  • 3-year unlimited mileage warranty

    • n

  • Fitting will take 1-2 hours depending on mechanical skill

    • n

  • Proven to handle 250bhp

    • n

n

Highly efficient core capable of dealing with power levels from standard up to Stage 2 software time and time again, perfect for your fast road car. To read a more in depth investigation into this intercoolers performance on our track time Fiesta Click Here.

n

Finished in Pro-Series Satin Black or Silver

n

Registered Design Right number: 6023241

n

AIRTEC Part No: ATINTFO25

Tech Specs

Specification

Brand

Intercooler Finish

, ,

MPN

ATINTFO25

Ratings

Documents

Documents

Related products