n<strong>AIRTEC Test results</strong> - Tim's 233.3 bhp (Airtec cooled) Tuned Mini R53 @ Amd rolling road 10th May 2013 - Note
Perfect for Fast Road and Track use
As fitted to AIRTEC demo car.</strong>
n
nThe Airtec S3 1.8 Turbo Intercooler kit is reasonably priced but high quality alternative from cheap nasty Ebay kits &amp; more than capable of doing the same if not better job than more expensive Intercooler kits
we take a huge amount of pride in making sure our kits are finished to an extremely high standard and we have a real eye for attention for detail.
n
n<strong>AIRTEC Front mount Intercooler kit Includes these parts &amp; Features</strong>

AIRTEC Motorsport Intercooler Upgrade for Audi S3 1.8T (8L) Quattro

£477.99

<strong>Finished In Pro-Series Satin Black or Silver</strong>
n
nRemoves restrictive twin Intercooler set up for high flow single pass 60mm core design
n
n<strong>Rolling Road Tested ’12bhp increase in BHP’ on a stage1 car (only remap installed) Tested @ AMD Tuning Essex</strong>
n
nPlease note, above test results taken from Seat Cupra R rolling road testing, it uses same intercooler and pipe work as the Airtec S3 intercooler kit, which means you will get the same great results!
n
nAIRTEC Part No: ATINTVAG10 by Airtec Motorsport

EAN: N/A SKU: Airtec Motorsport/ATINTVAG10 Category:

More Information

Product Information

An great upgrade for your modified S3, Perfect for Fast Road and Track use, As fitted to AIRTEC demo car.
n
nThe Airtec S3 1.8 Turbo Intercooler kit is reasonably priced but high quality alternative from cheap nasty Ebay kits & more than capable of doing the same if not better job than more expensive Intercooler kits, we take a huge amount of pride in making sure our kits are finished to an extremely high standard and we have a real eye for attention for detail.
n
nAIRTEC Front mount Intercooler kit Includes these parts & Features
n

    n

  • 1 x Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler
  • n

  • High quality 4/5ply silicon hoses with no joins (Red,Black and Blue) which means better flow inside the pipe work, finished stainless Jubilee clips
  • n

  • Stainless horn and ambient temperature support brackets with Airtec logo’s
  • n

  • Retains original crash bar ‘requires minor cutting, detailed in instructions’
  • n

  • Retains original fog lights
  • n

  • No cutting to bumper
  • n

  • Fitting Instructions and all required fixings
  • n

  • Requires minor cutting around fog light area of bumper, fog light grilles remain un-cut and detailed in instructions
  • n

  • Un-Beatable value for money
  • n

  • Proven Power Increase’s for Fast Road & Track
  • n

  • Available in Satin Black or Natural Silver
  • n

  • Airtec 3 year unlimited mileage warranty
  • n

  • Fitting will take 2-3 hours depending on mechanical skill
  • n

  • Fits all 1.8T S3 (8L chassis)
  • n

nAmd Rolling Road tested results – Stage 1 remap ‘Higher stages of tune will see even bigger gains’
n

    n

  • Standard – Temps Into Intercooler 128 degrees & Out of Intercooler 49 degrees, 12 bhp gain in mid range and standard Intercooler kept losing power
  • n

  • AIRTEC Intercooler – Temps Into Intercooler 126 degrees & Out of Intercooler 23 degrees.
  • n

nPlease note, above test results taken from Seat Cupra R rolling road testing, it uses same intercooler and pipe work as the Airtec S3 intercooler kit, which means you will get the same great results!

Tech Specs

Specification

Brand

Hose Colour

, , , , , ,

MPN

ATINTVAG10

Intercooler Finish

, ,

Ratings

Documents

Documents